Re: Burning DVDs
Posted by pezpmocuivunmnx on .
Its a bit hard to see all the connections, but as long as the Xeno matches this wiring guide https://bitbuilt.net/forums/index.php?attachments/install-guide-jpg.1627/ and assuming all nothing is being bridged, it should be installed correctly, which only really leaves the pot., or crappy discs. I don't know what the original pot. value was for your gc, but 170 feels like a big number, so it could be that you need to lower to pot. to something like 160 or 150. You can read more on pot. adjustment here https://www.gc-forever.com/wiki/index.php?title=Laser_Tuning but if it still doesnt work and assuming the Xeno is installed correctly and the image you are burning is good, you may have just bought some crappy discs, so the only solution would be to buy some higher quality ones, such as the ones the laser tuning guide recommends
Ok I just tested it and it still hasn't worked https://imgur.com/gallery/ryFoorx here is the new discs both ISOs instead of nkit isos, and here is my Xeno chip. https://imgur.com/gallery/mLouxky . I don't know what Im doing wrong now. should I have verified with the NKIT proccesing app?